Lowrance
LHR-20/22
Operation Instructions
9
3. Installing the Belt Clip
The belt clip supplied with your radio allows you to attach the radio to your belt. To install the belt
clip: slide the belt clip to the back of your radio, make sure that the fitting Groove is aligned.
Using Your Radio
You should familiarize yourself with the following operating procedures:
1.
Turning the unit on/off.
2.
Adjusting Squelch.
3.
Transmitting and receiving.
4.
Accessing the 16/9 priority channels.
5.
Selecting channels.
6.
Selecting high/low power.
7.
Locking the keypad.
8.
Adding channels to memory.
9.
Scanning channels.
10.
Accessing channels saved to memory.
11.
Using the WATCH modes.
12.
Selecting a WX (weather) channel.
13.
Weather Alert operation.
14.
Selecting U.S./International/Canadian Band
15.
Resetting the radio
1. Turning the Power On/Off
Use
PWR/VOL
knob to turn on the radio, once on, adjust the volume as well.
To turn on the radio:
1. Rotate the
PWR/VOL
knob to turn the radio on or off. The knob will make a “click” sound
when the radio is turned on. The last used channel will appear on the LCD display.
2. Once on, rotate the
PWR/VOL
knob further to adjust the volume.