manualshive.com logo in svg

Lowrance LMS-332C, Installation And Operation Instructions Manual

The Lowrance LMS-332C is a versatile marine GPS unit with advanced features. Ensure smooth installation and optimal usage with the comprehensive "Installation And Operation Instructions Manual". Download this manual for free from our website, where you can find a wide range of user manuals for various products.

Share
Download
background image

6

1957.) A sonar consists of a transmitter, transducer, receiver and dis-
play. In simple terms, here's how it finds the bottom, or the fish:

The transmitter emits an electrical impulse, which the transducer con-
verts into a sound wave and sends into the water. (The sound frequency
can't be heard by humans or fish.) The sound wave strikes an object
(fish, structure, bottom) and bounces back to the transducer, which
converts the sound back into an electrical signal.

The receiver amplifies this return signal, or echo, and sends it to the
display, where an image of the object appears on the scrolling sonar
chart. The sonar's microprocessor calculates the time lapse between the
transmitted signal and echo return to determine the distance to the
object. The whole process repeats itself several times each second.

Your unit can record a log of the sonar signals that scroll across the
screen and save them to the MMC memory card. (These recordings are
also called sonar charts or sonar graphs.) You can replay this sonar log
in the unit using the Sonar Simulator function, or play it back on a per-
sonal computer using our free Sonar Viewer. The viewer is available for
download from the Lowrance web site, www.lowrance.com.

You can save several different sonar log files, erase 'em and record new
ones, over and over again. The size of your sonar recordings is only
limited by the free space available on your MMC.

How Lowrance GPS Works

You'll navigate faster and easier if you understand how your unit scans
the sky to tell you where you are on the earth — and, where you're go-
ing. (But if you already have a working understanding of GPS receivers
and the GPS navigation system, skip ahead to Section 2, 

Installation &

Accessories

 on page 13. If you're new to GPS, read on, and you can later

impress your friends with your new-found knowledge.)

First, think of your unit as a small but powerful computer. (But don't
worry — we made the unit easy to use, so you don't need to be a com-
puter expert to find your way!) It includes a keypad and a screen with
menus so you can tell it what to do. The screen also lets the unit show
your location on a moving map, as well as point the way to your desti-
nation.

This gimbal-mounted unit uses an external antenna/receiver module,
which makes the whole system work something like your car radio. But
instead of your favorite dance tunes, this receiver tunes in to a couple of
dozen GPS satellites circling the earth. (It will also listen in to the
WAAS satellites in orbit, but more about that in the upcoming segment
introducing you to GPS and WAAS.)

Summary of Contents for LMS-332C

























































































































































































































Reviews:

No comments

Related manuals for LMS-332C

12trace GeoChaser Control User Manual preview
GeoChaser Control
Brand: 12trace Pages: 8
Garmin GPSMAP 4010 Owner'S Manual preview
GPSMAP 4010
Brand: Garmin Pages: 68
Navman Halo Qube 2 Installation Manual preview
Halo Qube 2
Brand: Navman Pages: 16
Cylink 303F User Manual preview
303F
Brand: Cylink Pages: 22
Qstarz CR-Q1100V Quick Start Manual preview
CR-Q1100V
Brand: Qstarz Pages: 38
Garmin GPS II+ Owner'S Manual & Reference preview
GPS II+
Brand: Garmin Pages: 112
YF GPS 84A-53 User Manual preview
GPS 84A-53
Brand: YF Pages: 46
Huntloc HLT-2.6 User Manual preview
HLT-2.6
Brand: Huntloc Pages: 2
Kognitiv TrakaPet 2.0 User Manual preview
TrakaPet 2.0
Brand: Kognitiv Pages: 13
YANHUI CCTR-829 Using Manual preview
CCTR-829
Brand: YANHUI Pages: 13
Qstarz BT-Q795 Quick Installation Manual preview
BT-Q795
Brand: Qstarz Pages: 2
Qstarz BT-Q1000XTM Quick Start Manual preview
BT-Q1000XTM
Brand: Qstarz Pages: 1
Black Box JIDO T63 User Manual preview
JIDO T63
Brand: Black Box Pages: 36
NexTraq VT-2300 Installation Manual preview
VT-2300
Brand: NexTraq Pages: 32
Tri-M Systems FV-25 User Manual preview
FV-25
Brand: Tri-M Systems Pages: 158
US Fleet Tracking USFT VT-X5 Install Manual preview
USFT VT-X5
Brand: US Fleet Tracking Pages: 2
TomTom Navigator Navigator 2 Reference Manual preview
Navigator Navigator 2
Brand: TomTom Pages: 17
Seeworld S708 User Manual preview
S708
Brand: Seeworld Pages: 12

Brands by name

Popular brands

Load more brands