Lowrance LVR-850 Installation And Operation Instructions Manual Download

Page: 30 / 40

3. Press the Call key and the big digit will blink and the channel will
switch to Ch. 16. Press the

CALL

key again and the position data will be

sent through Ch. 70. After the transmission on Ch. 70, the ID Annun-
ciator will flash, indicating it is waiting for an

ACK

. If an

ACK

is not

received, another call can be made to send your position to the same
MMSI by pressing the

CALL

key. When the position send is acknowl-

edged, an alarm will be heard. Press the

16/9

key to cancel the alarm.

4. Press

16/9

key to return to the main screen.

To request a position (P2):

1. Press

CALL

, then use the

↑

↓

keys to select

DIR

from the main screen.

2. To edit or enter the P2 location, use the

↑

↓

keys to select position P2

from the directory. P2 will be displayed in the bottom right corner of
the display. If the P2 location has

in the window,

you must enter the

MMSI of the vessel from which you're trying to request a position.
Press

MEM

and use the

↑

↓

keys to enter the MMSI numbers, pressing

MEM

after each digit has been entered. When finished, press and hold

the

CALL

key for five seconds. The screen will show

FL P2

letting you

know the MMSI is now stored in the P2 location. The MMSI number
will be stored in the P2 location until you edit or replace the MMSI in-
formation.

3. Press the

CALL

key and the big digit will blink and the channel will

be switched to Ch. 16. Press the

CALL

key again and the position data

will be requested through Ch. 70. After the transmission on Ch. 70, the
ID Annunciator will flash, indicating it is waiting for an

ACK

. If an

ACK

is not received, another call can be made to request the position of the
same MMSI by pressing the

CALL

key. When the position request is

acknowledged, an alarm will be heard. Press the

16/9

key to cancel the

alarm.

4. Press

16/9

key to return to the main screen. The vessel's location will

be displayed on the GPS map.

Reception

To receive a position send:

1. An alarm will sound and the

ACK

Annunciator will be displayed from

the main screen.

2. Press the

16/9

key to stop the alarm.

3. If the MMSI number of the vessel sending its location is in your di-
rectory, its directory location will be displayed. If the vessel is not in
your directory, its MMSI number will be displayed.

4. Press

16/9

to return to the main screen. The vessel's location will be

displayed on the GPS map.

Summary of Contents for LVR-850








































Search results

Summary of Contents for LVR-850

Reviews:

Related manuals for LVR-850

Brands by name

Popular brands

Lowrance LVR-850, Installation And Operation Instructions Manual

Search results

Summary of Contents for LVR-850

Reviews:

Related manuals for LVR-850

Brands by name

Popular brands