4 |
SpotlightScan |
Operation Manual
Non-touch HDS Gen2 units
The SpotlightScan system does not connect directly to HDS Gen2
non-touch units. To use SpotlightScan imaging with a non-touch
unit, network the unit to a SonarHub or to a HDS Gen2 Touch unit
and select the SonarHub or HDS Gen2 Touch as your sonar source.
Refer to your operation manual for instructions on selecting a sonar
source.
SpotlightScan setup
Selecting trolling motor type
The position sensor must be calibrated with your trolling motor.
1.
Access the Network menu
2.
Select
Device list
3.
Select the position sensor
(SLS-100)
from the device list
4.
Select
Calibrate
on the device information dialog
5.
Select your trolling motor type
6.
Select
Calibrate
7.
Select
OK
on the confirmation dialog
Summary of Contents for SpotlightScan
Page 1: ...ENGLISH SpotlightScan Operation Manual lowrance com ...
Page 2: ......
Page 11: ......
Page 12: ... 988 10618 001 ...