Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ sales@loxit.com ꞁ +44(0)1625 856 801
2.
Insert a charger into the power strip or a USB lead into the Loxit USB
charger, depending on your IBank model.
3.
Loop the charge cable through
the cable restraint cutout as
shown, then pass the cable
through the J-shaped cutout
and feed it through.
Cable restraint
J-Shaped cutout
4.
Repeat steps 2 and 3 until all
the cables are in place.
5.
Bolt the vanity panel back into
place using the four bolts.
The installation of your IBank 10 is now complete
