L-Proxy User Manual
117
LOYTEC
Version 3.1
LOYTEC electronics GmbH
2.
This opens the dialog shown in Figure 117.
Figure 117: Set Configuration Properties in LonMaker TE.
3.
In this dialog select the radio button
Upload values from device
in the
Operation
group box. To use the current settings of the device as default values for new devices,
select
Set device template defaults from device
.
4.
Execute the operation by clicking the
OK
button.
7.10.2 Upload the System Log
The system log on the device contains important log messages. Log messages are generated
for important operational states (e.g., last boot time, last shutdown reason) or errors at run-
time. This file is important for trouble-shooting and is available on the Web UI (see Section
5.3.5). The file can also be uploaded from the device with the L-Proxy Configurator.
To Upload the System Log
1.
Connect to the L-Proxy via the FTP or LNS method (see Section 7.9.2).
2.
Click on the
Upload system log
button
in the tool bar. The upload system log dialog as shown in Figure 118 opens showing
the upload progress.
Figure 118: Upload system log dialog.
3.
When the upload is finished, click on
Show System Log
. The system log window
appears as shown in Figure 119.
Summary of Contents for L-Proxy
Page 1: ...L Proxy CEA 709 Gateway User Manual LOYTEC electronics GmbH ...
Page 10: ......
