L-Proxy User Manual
28
LOYTEC
Version 3.1
LOYTEC electronics GmbH
4.6.2 Option 2 – IP Address, 3 – IP Netmask, 4 – IP Gateway
Please enter the IP address, the netmask (e.g., 255.255.255.0), and the default gateway
address.
Important!
The default IP address 192.168.1.254 is only set for configuration access. It must be
changed in order to make the device functional.
Option 5 – Hostname, 6 – Domainname
Hostname
and
Domainname
are optional entries and can be left empty. For some DHCP
configurations it may be necessary to enter a hostname. Please contact your system
administrator to get information on how to configure DHCP to acquire an IP address.
4.6.3 Option 7 – DNS Servers
You can configure up to 3 Domain Name Servers. On the L-Proxy these settings are not
required and purely optional.
4.6.4 Option 9 – MAC Address
The L-Proxy comes configured with a unique MAC address. This address can be changed
in order to clone the MAC address of another device. It can be dangerous to change the
MAC address. Please contact your system administrator to avoid MAC address conflicts.
After selecting menu item ‘9’ the following message appears.
Override factory MAC address (y/n):
Enter ‘y’ to input a new MAC address or enter ‘n’ to clear the current MAC address and
return to the factory default MAC address.
4.6.5 Option 0 – NTP Servers
You can configure up to 2 NTP servers. Select ‘0’ and when prompted
Enter new address of NTP server 1:
enter the first NTP server’s IP address. Press
Enter
. When prompted, enter the IP address
of the second NTP server and press
Enter
. To clear an NTP server’s address, leave the
respective IP address blank and press
Enter
.
The NTP server information will be used to synchronize the system time if the NTP time
source has been selected in the system configuration menu (see Section 4.3.3). The text
appended to this menu item displays the current NTP synchronization status (
or
in-sync
).
4.6.6 Option b – Link Speed & Duplex
If the L-Proxy is operated with an old 10 Mbit/s-only hub, the
link speed
should be
switched from
Auto Detect
to
10Mbps/Half-Duplex
. With modern 10/100 Mbit/s
switches, this setting can be left at its default (
Auto Detect
).
Summary of Contents for L-Proxy
Page 1: ...L Proxy CEA 709 Gateway User Manual LOYTEC electronics GmbH ...
Page 10: ......
