L-Proxy User Manual
80
LOYTEC
Version 3.1
LOYTEC electronics GmbH
Modify L-Proxy internal connections
Section 7.11
Download configuration to L-Proxy
Section 7.9.11
Other ports where the NV
interface has changed?
no
yes
START
Create external NVs on Port x
Section 7.9.10
Upload/import port definitions
Section 7.9.12
DONE
Start L-Proxy Configurator stand-alone
Section 7.9.2
Upload configuration
Section 7.9.3
Extract and save the port interface definition
Section 7.9.12
Figure 67: Work flow to modify an L-Proxy interface without LNS.
To change the network variable interface of Port x open the L-Proxy Configurator software
stand-alone, connect to the L-Proxy using the FTP method (see Section 7.9.2) and upload
the current configuration from the L-Proxy (see Section 7.9.3). Then create, delete or
modify the external input and output network variables (see Section 7.9.10). Note, that
there is no need to create bindings for external NVs. Finally, export the updated port
interface definition for Port x (see Section 7.9.12). These steps can be done independently
by separate engineers in parallel.
At the end of all changes one engineer is designated to modify the internal connections in
the L-Proxy to adapt to the updated NV interface. This engineer starts the Configurator
stand-alone and connects to the L-Proxy via the FTP method (see Section 7.9.2). Then he
uploads the current configuration (see Section 7.9.12) and imports the updated port
interface definitions (see Section 7.9.12). Then the connections can be modified (see
Section 7.11). Finally, the updated configuration needs to be downloaded into the L-Proxy
again (see Section 7.9.11).
7.4.7 Replace an L-Proxy
An L-Proxy can be replaced in the network by another unit. This might be necessary, if a
hardware defect occurs. First of all, the replacement L-Proxy needs to be configured with
the appropriate IP settings, including all relevant CEA-852 device settings. The remainder
of this section focuses on the L-Proxy port interface configuration and internal connection
configuration. The work flow is depicted in Figure 68.
Summary of Contents for L-Proxy
Page 1: ...L Proxy CEA 709 Gateway User Manual LOYTEC electronics GmbH ...
Page 10: ......
