16 | LP Morgan Installation Instructions
LP Morgan Flipper Manual
Flipper Skyhook unit
These bolts will also give you Yaw and Tilt adjustment to align your image on
the screen, while the centre M8 bolt provides Pan adjustment. The springs will
ensure that the projector is held still during motion. Do not install the projector
plate without springs.
First ensure that the Flipper is operating correctly, and that the projector
cables are properly secured.
Open the Flipper and bolt the
triangular projector plate to the
underside of the Flipper using the
supplied M6 bolts and springs.
Detail: M6 bolts and Spring
M6 Bolt and
Washer
Spring
Extra Adjustment
You can fine tune the open and closed positions of the Flipper by adjusting
the angle of the two limit arms on each side of the pivot frame (see page 5 for
part names).
These arms hit the limit switches in the closed and open positions.