14
SEAT TILT – OPTION Z-C2-A
The Z-C2-A option enables seat tilt adjustment to meet the occupant’s needs.
Depending on the positioning of the gas spring on the base’s multi-hole plate,
you can get:
A. Significant assistance when getting up.
B. Slight assistance when getting up.
C. A backward tilt.
WARNING: THE CHAIR MUST BE UNOCCUPIED WHEN MAKING THIS
ADJUSTMENT. For this operation, it is strongly recommended to lay the
chair on its side for safer maneuvering to minimize the risk of jamming
fingers. It will also make the operation easier.
A
B
C
1. Lay the chair on its side.
2. While holding the gas cylinder
with one hand, Remove the
locking pin connecting the gas
spring to the base.
3. Reposition the gas spring to the
desired location then re-insert
the locking pin and secure it with
the wire retainer. Check the seat tilt
by activating the gas spring.
Make sure that the gas spring
control cable always remains free
and does not pinch.
4. Have the patient try the chair.
