2 3
4
MAINTENANCE
→
CONNECTING/DISCONNECTING
THE MOTORISED TREATMENT HEADS
To connect the heads to the hose, follow the
procedure below:
Position the locking ring in the locked position
(Fig. 1).
Position the end of the hose so that the hose key
is lined-up with the key slot of the treatment head
connection
(Fig. 2).
Push the hose into the treatment head connection
until it cliks into place.
UNLOCKED
LOCKED
FIG. 2
FIG. 4
FIG. 5
FIG. 3
FIG. 1
LOCKING RING
ORNAMENTAL
RING
LOCKED
POSITION
HOSE KEY
KEY
SLOT
To disconnect the heads from the hose, follow the procedure below.
Position the locking ring in the unlocked position
(Fig. 3)
.
Pull the locking ring towards the hose
(Fig. 4).
Carefully remove the hose by pulling it by the white ring.
(Fig. 5).
UNLOCKED
POSITION
