4 4
7
TREA
TMENT
HEADS
ERGOLIFT HEAD AND ERGOLIFT CHAMBERS
FIG. 3
FIG. 1
REMOVAL TOOLS
FIG. 2
ROTATION 90°
ROTATION 90°
FIG. 4
For hygienic reasons, the maintenance of the treatment heads should be performed after
each use, using antiseptic wipes soaked with a bactericidal and fungicidal solution.
Special attention must be given to the cleanliness of the parts that are in contact with the
patient.
1. Disconnect the chamber from the Ergolift treatment head
(Fig. 1)
.
2. Remove the flap using the dedicated tool
(Fig. 2)
.
3. Thoroughly rub the Ergolift chamber, the flap and the tool for at least one minute
with the wipes as described below
(Fig. 3)
.
4. Put the flap back in the Ergolift chamber by following the same steps in the reverse
order
(Fig. 4)
.
→
MAINTENANCE
