3 6
7
TREA
TMENT
HEADS
FIG. 3
FIG. 1
FIG. 2
1.
Disconnect the micro-heads or micro-nozzles
from the adapter.
2.
For the micro-heads, use the dedicated tool
provided
(Fig. 1 & 2)
.
3.
Thoroughly rub, for at least one minute, the
rollers, seal, treatment chamber, micro-heads,
disassembly tool and micro-nozzles with LPG
®
wipes soaked in a bactericide and fungicide
solution
(Fig. 3)
.
4.
Refit the rollers and check they spin freely.
5.
To maintain the micro-heads use cotton
soaked with the same solution.
6.
Maintain the storage drawer using LPG
®
wipes
then place the heads in it.
MICRO-HEADS AND MICRO-NOZZLES
>
MAINTENANCE