background image

1

In order to respond better to customer requirements and expectations, LPG Systems is continuously 

researching ways of improving the design and quality of its products. This will explain the few minor 

differences between your equipment and the item described in this guide.

A T T E N T I O N

GU1602-EN

Edition A2 - 0

1

/20

21

OPERATOR’S MANUAL

Registered trademark

Congratulations on the purchase of your Cellu M6 Alliance

®

. This model represents 

the  fruits  of  numerous  years  of  experience  in  the  design  and  production  of 
cutaneous  tissue  treatment  systems.  You  will  experience  fully  the  technical 
perfection and reliability of LPG Systems, which is the leader in this sector. With 
the aim to continuously provide satisfaction, your device is equipped with a specific 
software devised to ensure connection with the LPG  Systems dedicated server.  
The data collected through this software will allow LPG Systems to give you better 
services in respect of support and maintenance.

This  operator’s  manual  contains  the  operating  description,  basic  maintenance 
instructions to be performed periodically and the safety instructions. Your device 
is intended for use in the treatment of connective tissue. It should be used only 
by  a  professional  who  has  attended  the  manufacturer’s  training  provided  by  
LPG Systems or an approved provider, if you live outside of France. If you have any 
doubts whatsoever concerning the operation or maintenance of your equipment, 
please do not hesitate to contact LPG Systems  via the Customer Service Department  
of your distributor. 

+33 (0)4 75 78 69 00

Please read the complete manual carefully

before using your equipement.

© Copyright 20

21

. LPG, CELLU M6 and Alliance are registered trademarks of LPG Systems. 

Reproduction, even in part, is strictly prohibited. 

CELLU M6

 Alliance

®

Summary of Contents for Cellu M6 Alliance






















Reviews: