1 4
1 5
The identification rating plate is located on the underside, at the back of the unit. Identification rating
plates may vary. The approved one is one on your machine.
Proscribe aggressive products such as acetone, trichlorethylene or alcohol at 90°.
≥
≥
A T T E N T I O N
A T T E N T I O N
MAINTENANCE
4
MAINTENANCE
4
>
IDENTIFICATION RATING PLATE
>
CLEANING THE UNIT
This icon indicates that the unit was sold after
August 13, 2006. In conformity with the
2002/96/CE directive, it cannot be thrown away
with standard household waste but must be
disposed of by means of recycling. When your
device reaches the end of its useful life,
it must be brought to an appropriate recycling
center or returned to your dealer. By doing so,
you help the environment by contributing
to the conservation of natural resources
and the protection of human health.
This icon indicates that some specific
warnings or precautions associated with
this device are not on the label.
This symbol means store the device
somewhere protected from inclement
weather.
This symbol indicates temperature limits.
This symbol indicates relative humidity limits.
This symbol means « danger: High Voltage »
This symbol indicates fragile,
handle with care
This symbol indicates keep it vertical
This symbol indicates not reverse
This symbol indicates athospheric pressure
limits.
This symbol means always consult
the accompagnying documents before using
your device.
Your unit is identified by a serial number
shown on the rating plate. The rating plate
also shows the permitted supply voltage
for the unit. If you need to contact LPG
Systems because of a technical problem,
please indicate the serial number of your
CELLU M6 Alliance
®
. This serial number
provides information on the year and month
of manufacture of your unit.
The letter indicates the year the device was
manufactured. Z=2009, A=2010, B=2011, etc.
The two digits indicate the production month:
01=January; 02=February; 03=March; etc.
serial
number
voltage
,
frenquency
and
power
It is recommended that you clean your unit as often as possible, not only for reasons
of hygiene and aesthetics but also because cleaning the unit will help keep it in a good state
of repair and extend its useful life.
Using a vacuum cleaner with a fine nozzle, clean the following sections:
• Interior of the head storage drawer.
• Interior of the head storage tray.
• Interior of the filter access door.
Using a moist sponge, clean the following sections:
• All the external hoods.
• Hoses.
• The electrical power cord.
Using a cloth soaked with a small amount of alcohol-free domestic cleaning product,
clean the following sections:
• Control screen and control panel.
• Interior of the head storage drawer.
• Interior of the head storage tray.
• Interior of the filter access door.
Using an antistatic cloth soaked or wipes, clean:
• The touch screen.
The maintenance of the care heads should be performed before the first use,
see chapter «head of care».
