3 5
TREA
TMENT
HEADS
7
→
CLEANING THE ERGOLIFT HEAD
AND ERGOLIFT CHAMBERS
FIG. 1
REMOVAL TOOLS
FIG. 2
ROTATION 90°
For hygienic reasons, the treatment heads should be cleaned after each use using
antiseptic wipes soaked with a bactericidal and fungicidal solution.
Special attention must be given to the cleanliness of the parts that are in contact with the
patient.
Before each use, clean the flap and Ergoift chamber:
1. Disconnect the chamber from the Ergolift treatment head
(Fig. 1).
2. Remove the flap thanks to the dedicated tool
(Fig. 2).
3. Thoroughly clean the Ergolift chamber, the flap and the tool for at least one minute with
the wipes as described here below
(Fig. 3).
4. Put the flap back in the Ergolift chamber by following the same steps in the reverse
order
(Fig. 4).
