26
27
4 service sheets
service sheets
4.2 diSconnecting HoSeS
normally locked connector
(When in place on the head or in
the female connector)
unlocked connector ready for extraction:
Turn the metallic ring to line up the two marks.
extraction of the connector, head, or female connector:
Pull on the metallic ring. The locks disappear,
and the connector comes out of its housing.
automatic engagement and lock:
Turn the ring into locked position and then press
it into its housing until it clicks into position.
locks
positioning
marks
unlocked
click !
locks
gone
4 service sheets
service sheets
note:
When servicing electrical components, we recommend wearing a grounded anti-static wrist strap
and working on an anti-static foam pad.
4.1 iteMS required For PerForMing SerVice
intervention
Material necessaire
4.3
Replacing a Head Hose
1 x T20 torx key
4.4
Replacing a Moving Arm
1 x T20 torx key, 1 x T30 torx key
4.5
Replacing Panel Adjustment
Brake (IHM)
1 x T20 torx key
4.6
Replacing the Top Structure
1 x T20 torx key, 1 x T30 torx key
4.7
Replacing the Filter Housing
1 x T20 torx key
4.8
Replacing a Front, Rear
or Side Cover
1 x T20 torx key, 1 x T3 hex key
4.9
Replacing the Head Support
1 x T20 torx key
4.10
Replacing a Castor Wheel
1 x T20 torx key, 1 x T3 hex key, 18cm wooden dowel
4.11
Replacing the Front Panel (IHM)
1 x T20 torx key
4.12
Replacing the Filter Sensor
1 x T20 torx key
4.13
Replacing the
Universal Power Supply
1 x T20 torx key, 1 x T3 hex key, 1 x 3mm flat screwdriver
4.14
Replacing the Regulation Board
1 x T20 torx key, 1 x key with a 3mm fork or tube,
1 x 3mm hex key
4.15
Replacing a Pump
1 x T20 torx key, 1 x T3 hex key, 2 x 10mm flat wrenches
4.16
Replacing a Pump
Startup Capacitor
1 x T20 torx key
4.17
Replacing the Fan
1 x T20 torx key, 1 x T3 hex key, 1 x cutting pliers
4.18
Replacing a Valve Block
(Regulation or Selection)
1 x T20 torx key, 1 x T3 hex key, 1 x 8mm flat wrench
4.19
Cleaning an EVS Selection Valve
1 x T20 torx key
4.20
Replacing a Light Strip Circuit
1 x T20 torx key, 1 x T3 hex key
4.21
Replacing the Ergodrive Front Panel
1 x T7 torx key, 1 x 3mm flat screwdriver
4.22
Replacing the Ergodrive Lower Plate
1 x T7 torx key, 1 x 3mm flat screwdriver,
1 x N°2 Phillips screwdriver
