42
43
features
5 features
4 service sheets: ergodrive treatment head
service sheets: ergodrive treatment head
4.22 rePlacing tHe ergodriVe loWer Plate
Safety:
For safety reasons, the CELLU M6 safety operator or technician should not continue
when the machine is powered on or in 230V areas.
Unplug the power cord from the outlet.
required materials:
1 x T7 torx key, 1 x 3mm flat screwdriver, 1 x N°2 Phillips screwdriver
operating time:
15 min.
1)
Remove the four caps and
unscrew the screws (T7 Torx).
7)
Unscrew the six assembly
screws. (No. 2 Phillips
screw T7 Torx) Lift and
remove the top lid with the hose.
2)
Remove the two inverter buttons
using a lever to extract them.
8)
Unscrew the six screws
holding the rotating
mechanism (No. 2 Phillips
screwdriver).
3)
Disconnect the two cables,
and remove the panel assembly.
9)
Remove the lower lid.
Remove the rotating
mechanism.
4.21 rePlacing tHe ergodriVe Front Panel
Safety:
For safety reasons, the CELLU M6 safety operator or technician should not continue
when the machine is powered on or in 230V areas.
Unplug the power cord from the outlet.
required materials:
1 x T7 torx key, 1 x flat screwdriver.
operating time:
5 min.
reassembly:
Perform the operations in reverse to reassemble the new assembly.
reassembly:
Perform the operations in reverse to reassemble the new assembly.
1)
Follow the instructions from step 1 to 3:
4.21 rePlacing tHe Panel
5 .1
technical features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5 .2
presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5 .3
power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5 .4
reseau electrique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5 .5
environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . 45
5 .6
performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5 .7
siZe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5 .8
structural components . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5 .9
treatment heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5 .10
materials used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5 .11
protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5 .12
maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5 .13
miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5 .14
applicable directive & standards . . . . . . . . . . . . . . . . . . . . 48
