60
61
>
6.9b unitary teStS taB (cont.)
adapter Screen
The adapter and its associated functions can be tested from this screen.
The connection of an adapter or an auxiliary head is automatically
detected and indicated beneath the adapter image.
Button test:
Each adapter button can be tested independently.
The depressed button is indicated by an arrow on the image.
configuration and maintenance menus
6 configuration and maintenance menus
lights Screen
The light band and its colour settings can be tested from this screen.
The colour mix (red, green and blue) for each light band is
adjusted by pressing the appropriate buttons. This adjustment is
not memorized by the unit and is only used to test the individual
coloured lights.
Hmi Screen
The touch-screen backlight and calibration can be adjusted from this screen.
A setting of 0% is possible by decreasing the backlight adjustment. This setting is temporary as information
is no longer visible on the screen. A pop-up warning is displayed when the backlight setting is 0%.
Confirming this pop-up warning allows the backlight setting to reduce to 0% for 5 seconds. After this delay,
the setting is automatically increased to 10%.
Button
action
Min
Reglage du retro-eclairage a 10%
-
Diminution du retro-eclairage de 10 %
Max
Reglage du retro-eclairage a 100%
+
Augmentation du retro-eclairage de 10 %
adapter test screen
light band test screen
touchscreen test screen
cont .
>
configuration and maintenance menus
6 configuration and maintenance menus
>
6.9b unitary teStS taB (cont.)
ergodrive Screen
The Ergodrive head and its associated functions can be tested from this screen.
Button test:
Each Ergodrive button can be tested independently.
The depressed button is indicated by an arrow on the image.
test ecran:
The screen position and the presence of defective
pixels can be tested by pressing the ‘Screen
Position’ button. The following screen is displayed:
The TR50 must be disconnected to remove
this screen.
tr50 Screen
The TR50 treatment head and its associated functions can be tested from this screen.
Button
action
SCREEN BRIGHTNESS AND BACKLIGHT ADJUSTMENT:
OFF
Backlighting off
ON
Backlighting on
CONTRAST ADJUSTMENT:
0
Contrast set at 0%
-
Reduce contrast by 10%
100
Contrast set at 100%
+
increase contrast by 10%
CONNECTED KEyMODULE ROLLER SPEED ADJUSTMENT
-
Roller speed decreased by 10%
- 100
Roller speed decreased by 100%
0
Stop rollers
+
Roller speed increased by 10%
+ 100
Roller speed increased by 100%
Button
action
-
Roller speed decreased by 10%
- 100
Roller speed decreased by 100%
0
Stop rollers
+
Roller speed increased by 10%
+ 100
Roller speed increased by 100%
ergodrive and keymodules screen
tr50 test screen
cont .
>
