6
7
information
1 information
1.2 Product Storage conditionS
Package characteristics:
Triple-wall cardboard
•
Interior foam spacers
•
Attachment with straps on a wooden palette
•
Storage:
The room where the product will be stored will be between –20°C and 70°C and the relative humidity will be between
10% and 90%, without condensation.
Observe the conditions detailed by the following icons:
Shipping diagrams and icons:
Handling:
By fork-lift truck.
Stackability:
Not possible.
Sea transport:
With an individual sealed bag and cardboard.
shock indicator
(for export only)
fragile, handle
with care
stocker a l’abri
des intemperies
maintenir
a la verticale
ne pas renverser
tilt indicator
(for export only)
(for export only)
information
1 information
1.1 WarningS
Who is this manual for?
Only technicians from the manufacturer-approved maintenance company or a manufacturer’s representative are
authorized to perform the maintenance operations described in this document
How long is it valid?
LPG
®
Systems reserves the right to alter the characteristics of its products at any time in order to incorporate the
latest technological advancements.
The information contained in this document is therefore subject to change without notice.
This document is the property of LPG
®
Systems. It must not be copied or disclosed to third parties, in any form
whatsoever, without the express permission of LPG
®
Systems (law dated 03/11/1997).
What are the conditions for using the cellu
®
M6?
The Cellu M6
®
should only be used by a qualified professional.
The Cellu M6
®
may only be used indoors.
The index of protection IP 20 defines protection against solid bodies that are at least Ø › 12 mm, not against splashes.
The electrical protection class is class 1 (interconnected grounded masses).
The Cellu M6
®
should be installed near a power outlet that should remain accessible after installation.
The power outlet must have a ground resistance
≤
3 ohms to operate properly and for personal safety, in accordance
with current standards.
If the power outlet cannot be accessible, then during the installation, provide a selector switch that is quickly and
easily available, with the following characteristics: bipolar 16A and 230V.
The Cellu M6
®
was designed to be connected to network with neutral grounded.
Provide for 30mA differential protection upstream of the power outlet where the machine is connected.
The Cellu M6
®
will be used on a flat, stable, and hard surface
that is free of water. It is not attached to the ground, but its
wheels do not allow it to move across thresholds or stairs.
If necessary, restart the machine on its palette.
The temperature of the room must be between 10°C
and 30°C, with 30% to 85% relative humidity (without
condensation) in a normally ventilated room.
Do not put the Cellu M6
®
where it is directly exposed
to the sun or near heaters.
157cm
86cm
75cm
