12
13
2 overview, operation, and maintenance
overview, operation, and maintenance
2.3 oPerating diagraMS
1/a Pneumatic Circuit Diagram . . . . . . . . . . . . . . . . . . . . p.13
2/a Board Connection Diagram . . . . . . . . . . . . . . . . . . . . . p.14
3/a Head Connection Diagram . . . . . . . . . . . . . . . . . . . . . p.15
4/a Bus Can and DC Power Diagram . . . . . . . . . . . . . . . . p.16
1/a Pneumatic circuit diagram
overview, operation, and maintenance
2 overview, operation, and maintenance
>
2.2 PrinciPle oF oPeration (cont.)
light strips
The purpose of the light strips is to add aesthetic value to the device:
Controlled by the control board, which receives information from the PC panel.
•
The electronic circuits are powered by the 9v from the control board, and the LEDs are powered by the 24vDC
•
from the power supply.
compartment Fan
The fan’s role is to keep the pump compartment at an optimal temperature.
Controlled by the control board, which receives information from the PC panel.
Powered by the 24v from the power supply, it is controlled by the control board, which received tachometric
information from the fan.
Voltage presence light
The voltage light notifies the user that the device is connected to the network, that it is receiving power,
and that it is ready to operate.
roll Massage Head
The motorized massage head adds two moving rollers to the suction. Their function is to form a wave that will be
rolled up by the first roller, sucked to the top middle by the pressure, and then unrolled by the second roller.
It is controlled by the user either on the head using the switch and power settings or on the control panel screen.
The suction sequence and roller speed and direction can be adjusted. This information passes through the control
board.
The auxiliary heads have the same effect as the main head. The difference is that there is no motorized rotation.
Instead, pressure alone is enough to form the wave due to the narrow configuration of the nozzle.
lift Heads (tMl Series)
The care head adds flap movement to the suction. It forms a fold and then releases it.
The suction sequence can be adjusted. This information passes through the control board.
note:
the selected treatment power is constantly controlled through a system of electronic pressure sensors.
However, if the treatment power is too high or incorrect, it can cause pain and trauma to the skin tissue, which
may lead to bruising.
