1 9
1 8
ERGOLIFT HEAD
5
>
CLEANING THE ERGOLIFT HEAD
AND ERGOLIFT CHAMBERS
FIG. 1
REMOVAL TOOLS
FIG. 2
90° ROTATION
For reasons of hygiene, the treatment heads should be cleaned after each use, using
antiseptic wipes impregnated with a bactericidal and fungicidal solution.
Special attention must be given to the cleanliness of the parts that are in contact with the
client.
Before each use, clean the flaps and Ergolift chamber:
1. Disconnect the chamber from the Ergolift treatment head.
(fig. 1)
2. Remove the flaps thanks to the dedicated tool.
(fig.2)
3. Thoroughly clean the Ergolift chamber, the flaps and the tool for at least one minute
with the wipes described here below.
(fig.3)
4. Put the flaps back in the Ergolift chamber by following the same steps in the reverse
order
(fig.4)
ERGOLIFT HEAD
5
>
CLEANING THE ERGOLIFT HEAD
AND ERGOLIFT CHAMBERS
(CONT’D)
FIG. 3
90° ROTATION
FIG. 4
The use of aggressive products, such as acetone, trichloroethylene, or alcohol, and abrasive sponges, ultrasound
or UV lamps is strictly prohibited. All cleaned and/or disinfected heads should be placed in the storage drawer to avoid
any confusion.
≥
A T T E N T I O N
