6
7
11Europe VIIG-H05VVF3G0,75-C13; Italy I/3/16-H05VVF3G0,75-C13; Switzerland 12G-H05VVF3G0,75-C13; UK
BS13/13-H05VVF3G0,75-C13; Japan 498GJ-VCTF3X1,25-C13; USA, Canada, Mexico N5/15-SJT3X18AWG-C13
≥
A T T E N T I O N
>
CONTROL SCREEN
>
ERGOLIFT HEAD
DESCRIPTION OF THE CONTROLS
2
PREC
AUTIONS OF USE
3
>
WARNING
>
IMPORTANT SAFETY INFORMATION
All safety precautions must be observed whilst using electrical equipment. Please read all
safety notices and precautions prior to use of the equipment.
DANGER
- TO MINIMIZE THE RISK OF ELECTRICAL SHOCK:
• Always disconnect the equipment from the electrical supply outlet after use and before
cleaning and maintenance.
• Check that the supply voltage of the unit indicated on the data plate complies with
the mains voltage.
• The unit must be connected by the power cord
1
supplied to a grounded outlet in accordance
with current electrical standards. Electrical adapters must not be used with this equipment.
• The equipment must not be left unattended
whilst connected to the electrical supply.
• Disconnect the unit from the electrical
supply if it is not going to be used for a long
period.
• Special attention is required whilst using
the equipment with, or in the proximity of
children or disabled persons.
• Never use the unit for purposes other than
those recommended by LPG Systems. Only
use the treatment heads supplied with your
unit or those recommended by LPG.
• Never use the equipment if:
- the electrical supply cable or outlet
is damaged.
- the equipment does not function correctly.
- the equipment is damaged or has fallen
or been dropped.
- the equipment has been exposed
to excessive humidity.
In such cases, return the equipment to an
approved LPG service centre.
• Do not move the unit by pulling on the
electrical supply cable.
• Fully unwind the electrical power cord and
keep it away from warm surfaces.
• Never use the equipment if the ventilation
ports are obstructed. Ensure that the
ventilation ports are kept clear of dust or
other contaminants.
• Do not allow solid debris, liquid or other
foreign bodies to fall or be sucked into the
unit, as these could cause damage.
• Never use the equipment on a dusty, uneven
floor, or in a moist atmosphere.
• Never use the equipment in the presence of
aerosols or oxygen.
• Before disconnecting the unit from the
electrical supply, set all controls to the ‘off’
position and unplug the unit.
• It is prohibited to modify this equipment
without prior authorisation from the
manufacturer.
• This device is a stationary device and shall
not be moved when in use.
- TO MINIMIZE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY
TOUCH SCREEN
TREATMENT
CONTROL SETTINGS
INFORMATION
ABOUT THE TREATMENT
TREATMENT CHAMBER
ERGOLIFT HEAD
FLAPS
