Care and Maintenance
62
MultiPress S
Operating manual 3.0
Rev: 3.6.2009
8.3 Maintenance work/ overhauling
The automatic hydraulic pump/the hand pump must be maintained/
serviced periodically. Carry out the maintenance within the specified
intervalls. Record the maintenance work with the date, type of activity
and signature by the responsible employee.
8.3.1 Approved hydraulic oils
The following types oil type can be used for the hydraulic pumps:
8.3.2 Maintaining the automatic hydraulic pump
Changing/refilling hydraulic oil
The hydraulic oil must be changed after 5 000 hours of operation.
To balance any oil loss due to operation, the oil level must be checked
prior to each start of operation of the MultiPress S. If the oil level is too
less. you must refill hydraulic oil.
Manufactorer
Viskosity (ISO): 46 cST/40°
DIN 51525: H-L/H-LP 46
ARAL
ARAL Vitam GF 46
ARAL Vitam DE 46
BP
BP ENERGOL HLP 46
BP ENERGOL HLP-D 46
ESSO
ESSO NUTO H 68
Mobil
MOBIL D.T.E. 68
MOBIL Hydr. Öl H-LPD 46
OEST
OEST Hydr. Öl H-LP 46
OEST Hydr. Öl 46 DD
Shell
Shell Tellus Oel 46
Shell Hydrol 46
Summary of Contents for MultiPress S
