For your own safety
6
MultiPress S
Operating manual 3.0
Rev: 3.6.2009
For your own safety
Designated Use
MultiPress S
The multilayer press MultiPress S is designed exclusively for the
pressing of multilayer printed circuit boards for the electronic sector and
may only be used for this purpose.
The press may only be used in conjunction with the hydraulic pumps
described here and must be considered together with them as a unit. The
use of other pumps or other pressure means is not admissible.
Any other use is inadmissible and will void any claims for liability and
warranty against the LPKF AG. This also applies to pressing and/or
drying of materials not designed for printed circuit production, e. g.
electronic components, foodstuffs and textiles. Processing liquids or
gaseous substances is inadmissible as well. Moreover, the MultiPress S
may not be used for aligning, tools, workpieces or housing components.
Hydraulic pumps
The automatic hydraulic pump or the hydraulic hand pump belonging to
the machine, depending on the scope of delivery, is not designed for use
with the MultiPress S.
Any other use of the hydraulic pumps is inadmissible and will void any
claims for liability and warranty against the LPKF AG. This applies in
particular to operation on other hydraulically operated devices, e. g.
lifting/driving and/or braking devices and presses.
Consumables/Materials
Only materials declared for the production of multilayer printed circuit
boards may be used. The data sheets and application information
delivered with the materials must be observed.
The use of other materials not taken under consideration can cause fires
or impair the function of the machine and is inadmissible.
Conditions of use
The press and hydraulic pumps have been designed for use in electric
workshops and electronic labs. They may only be used in dry rooms.
Operating them in environments subject to fire or explosion hazards is
not admissible.
Summary of Contents for MultiPress S
