Rev.: 13.01.2014
12
ZelFlex Z4P
devIce descRIPtIon
5
dEvicE dEScRiPtioN
5.1
Basic parts
5.1.1 Air connector
Fast connector enables a fast and effective air connection
with your air supply unit.
Make sure to use clean and dry air only.
5.1.2 Pins
Stencil supporting pins on the stretching bar enable a
fast and easy placement of stencils onto the ZelFlex
frame.
5.1.3 Protective holding bars
Protective bars have multiple functions:
•
holding the stencil down while air is supplied
•
providing good contact between pins and perforation
•
providing an adequate stencil level
•
protecting the stencil and operator from mechanical
hazards
5.1.4 Return springs
Return springs are factory adjusted for optimum
operation.
Do not adjust or change return springs position.
Wrong settings may damage the frame and the stencil.
Under moderate stress ZelFlex Z4P requires refilling every 48 h, whereas ZelFlex
Z4P Slim requires refilling every 24 h.
