OPTIMIERUNG
TUNING
Karosserie
Einige Fahrzeuge werden, je nach Ausstattung, mit einer unlackierten Karosserie ausgeliefert.
Diese werden von innen abgeklebt und lackiert (bitte Hinweis „Darstellung der Scheiben“ beachten). Die angezeichneten
Karosserielöcher können vor oder nach der Lackierung mit einem LRP Schälbohrer (Art.Nr. 65701) geöffnet werden.
Lackierung und Beklebung
Nachdem die Karosserie an den vorgezeichneten Linien mit einer Lexanschere ausgeschnitten wurde, bereiten man Sie zur
Lackierung vor.
Die Karosserie wird mit Seife ausgewaschen um Fett- und sonstige Rückstände zu entfernen.
Nachdem diese vollständig getrocknet ist, bringt man die Abklebefolie der Scheiben von innen auf (bitte Hinweis zur
Darstellung der Scheiben beachten). Anschließend wird die Karosserie mit spezieller Polycarbonatfarbe (Empfehlung LRP
Lexan Spray Magic Colour 2), ebenfalls von innen, in mehreren Schichten, dünn lackiert (Bitte Hinweise auf der Spraydose
beachten). Den Lack bitte mindestens zwölf Stunden trocknen und abziehen lassen. Nach der Lackierung die Schutzfolie
entfernen und die Aufkleber anbringen.
Achtung: Bitte nur in gut gelüfteten Räumen oder
im Freien lackieren!
Darstellung der Scheiben
Die Scheiben können auf zwei verschiedene
Möglichkeiten gestaltet werden. Entweder lackiert
man die Karosserie von innen komplett und bringt
die entsprechenden Aufkleber von außen auf, oder
man nutzt die Scheibenaufkleber vor der Lackierung
auf der Innenseite. Die Scheibenausschnitte werden
abgeklebt, überlackiert und nach trocknen der Farbe
wieder abgezogen.
Bodyshell
Several vehicles will be delivered with clear bodies.
They will be masked and painted on the inside
(please have a look to the hint of “Illustration of the
windows”).
The pre-marked body holes could be done before or
after painting with a LRP Body Reamer Wrench (Art.
Nr. 65701).
Paint and decals
After you have cut the bodyshell with a lexan scissors, please wash the body with dish soap and dry it completely. Then
you can apply the windows-mask from inside, as the bodyshell will be painted from the inside aswell (please have a look to
the hint of “Illustration of the windows). For painting please use only polycarbonate paint (reference LRP Magic Colour 2).
Please apply several skinny layers of the colour and let it dry for at least 12 hours (follow information on the spray can).
After painting the bodyshell, please remove the protective film first and then start with the decalisation of the bodyshell.
Attention: painting must be done only in well-ventilated areas or outside of a building!
Illustration of the windows
You have two different ways to “paint” the windows.
One way is to paint the complete bodyshell and then apply the window stickers at the outside of the body (removing
protective film first) . The other way is to use the window stickers on the inside of the body. Then you paint the body com-
pletely, let it dry and remove the stickers, so you will have clear windows.
P. 55