REGULATORY COMPLIANCE INFORMATION
The LineShare 4.1 complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
the underside of this equipment is a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
USOC:
When ordering service from the telephone company for the equipment the following information
should be supplied: Universal Service Order Code (USOC): RJ11C or RC13C.
Plug and Jack:
The plug and jack used to connect this equipment to premise wiring and telephone network
must comply with the applicable FCC Part 68 rules and requirements adopted by ACTA. A compliant tele-
phone cord and modular plug is provided with this product. The telephone cord is designed to be connected
to a compatible modular jack that is also compliant. See installation instructions for details.
Ringer Equivalency Number (REN):
The REN is used to determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to
an incoming call. In most but not all areas, the sum of the RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company. The REN for the equipment is part of the ACTA/FCC number that has the format
US:AAAEQ##TXXXX. The digits represented by the ## are the REN without the decimal point (e.g., 01 is a
REN of 0.1) and are followed by the Ringer Class (A or B).
Harm to the Network:
If this equipment causes harm to the telephone network, the telephone company will no-
tify you in advance that the temporary discontinuance of service may be required. But if advance notice isn’t
practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of
your right to file a complaint with the FCC if you believe it is necessary. Notification of Changes in Telephone
Company Equipment: The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens, the telephone company will pro-
vide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
Repairs or Returns:
If trouble is experienced with this equipment, for repairs or warranty information, contact
Long Range Systems at 800-437-4996. If the equipment is causing harm to the telephone network, the tele-
phone company may request that you disconnect the equipment until the problem is resolved. Only a qual-
ified factory representative should make repairs.
Party Lines:
This equipment must not be used on party lines.
Alarm Equipment:
You should ensure that this equipment does not disable alarm equipment in installations
where the alarm equipment utilizes the same telephone network connection as this equipment. If you have
questions about what will disable the alarm equipment, consult your telephone company or a qualified in-
staller.
Electrical Safety Advisory:
Telephone companies report that electrical surges, typically lightening transients,
are very destructive to customer terminal equipment connected to AC power sources. This has been iden-
tified as a major nationwide problem. A commercially available, power surge arrestor is recommended for
use with this equipment to minimize damage in the event of an electrical surge.
Long Range Systems
14
LineShare 4.1
