• Briefly press any button on the remote
control
The status LED
and the keypad
►
s
illumination flash alternately.
• Press button
l
on the double drive for
approx. 1 s.
The back adjustment motor moves
►
briefly up/down.
• The status LED
goes off, the keypad
s
illumination lights up constantly. The teach-
in process has been completed
successfully.
3.5 Bed adjustment
Before making any adjustments:
Check that neither you nor anyone
else or any pets are at risk from to the
moving parts of the adjustment
mechanics!
Use buttons
and
for the bed
1
2
adjustment. As long as you keep the
buttons pressed, the drives will move.
3.6 Torch function
Do not look directly into the torch LED!
• Press button
for approx. 3
3
seconds.
The torch LED
will switch on and
t
goes off automatically after approx.
20 seconds.
• Press button
again shortly will
3
switch off the torch LED.
• If you keep the button pressed, the
LED remains switched on. It then
goes off about 20 seconds after
releasing the button.
3.7 Reset to factory settings
Resetting the remote control:
• Simultaneously press and hold the
buttons
,
and
.
1 2
3
11
Operation
Caution
Caution
