XDesignerPlus Ver2.0 Communication Manual
7 / 13
Item
TOP
XGT(XGI/XGR), XGB(XEC) Series
Note
IP Address
*1)2)
192.168.0.50
192.168.0.51
User set
Protocol
TCP
XGT server
*3)
User set
Port
1024
2004
User set
Protocol
TCP/IP
UDP/IP
MODBUS TCP
Port number
2004
2005
502
■ [ Project >Project Property > Project >TOP Setting > TOP Name ]
Set communication interface of TOP.
-Right window : [HMI Setting > check HMI Setting using > Device manager].
-Right window : [HMI Setting > check HMI Setting using > PLC setting]
■ External device setup
Set the communication driver option “XGT(XGK), XGB(XBC,XBM) Series FENET”..
- IP Address (PLC): Type the IP address that the external device was given.
- Reading port / writing port: Choose the port number that will be used for ethernet
communication. Please input the port number that [GPPW] issued.
3.2 Example 2
Set your system as below.
*1)
Network address TOP and external device must be same. (IP's three place : 192.168.000 )
*2)
Don't use same address in same network.
*3)
XGT driver private port of FEnet I/F module admits communication to specified port number/protocol to appropriate IP.
(1) XDesignerPlus setting
[Project >Project property] of XDesignerPlus as below and download it to TOP machine.