Chapter 3 Installation and Wiring
XBC E-Type Main Unit
3-3
Ver. 1
I/O signal or communication line shall be wired at least 100mm
away from a high-voltage cable or power line.
If not, it may cause
abnormal output or operation.
Caution
Use PLC only in the environment specified in PLC manual or
general standard of data sheet.
If not, electric shock, fire, abnormal
operation of the product, or fire may occur.
Before installing the module, be sure PLC power is off.
If not,
electric shock or damage to the product may occur.
Be sure that each module of PLC is correctly secured.
If the
product is installed loosely or incorrectly, abnormal operation, error,
or dropping may occur.
Be sure that I/O or extension connecter is correctly secured.
If
not, electric shock, fire, or abnormal operation may occur.
Don’t expose PLC to harsh vibrations.
Electric shock, fire, or
abnormal operation may occur.
Don’t let any metallic foreign materials inside the product
, which
may cause electric shock, fire, or abnormal operation
.
Caution
Summary of Contents for XBC-DN10E
Page 1: ......
Page 10: ...Table of Contents Table of Contents 6 10 10 CLEAR ALL PLC 29...