![background image](http://html1.mh-extra.com/html/ls-industrial-systems/xbc-dn10e/xbc-dn10e_user-manual_1943831068.webp)
Chapter 3 Connection Configuration
XBC E-Type Main Unit
3-40
Ver. 1
3.8 Communications Specifications
3.8.1 Built-in Serial Communication Interface (Cnet)
Built-in serial communication is used to connect between the main unit and external devices. Further details can
be found in the XGB Cnet I/F Manual.
3.8.2 Communication Ports
Comm.
Ports
Connection
Type
Connects To
Protocols
Comm.
Port 1
Mini-DIN, 6-pin
- XG5000
programming
software
- Limited Operator
interfaces
1
- XGT Loader Protocol (CPU)
Comm.
Port 2
Terminal Block
(RS-232C/RS-485
User Selectable)
RS-485
- External Devices
- XGT dedicated protocol client
- Modbus ASCII/RTU client
- User defined client
- LS Bus Client
- XGT dedicated protocol server
- Modbus ASCII/RTU server
RS-232C
- External Devices
- XGT dedicated protocol client
- Modbus ASCII/RTU client
- User defined client
- LS Bus Client
- XGT dedicated protocol server
- Modbus ASCII/RTU server
Port
Terminal
Name
Description
Terminal Layout
Comm.
Port 1
1
-
Not Used
2
RX
Received Data
3
SG
Signal Ground
4
-
Not Used
5
-
Not Used
6
TX
Transmitted Data
Port
Terminal
Name
Description
Pinout
Comm.
Port 2
1
RX
Received Data
2
485+
485 + signal
3
TX
Transmitted Data
4
495-
485 – signal
5
SG
Signal Ground
1
Operator interface (HMI) compatibility is dependent on operator interface (HMI) drivers provided by operator
interface manufacturers.
Summary of Contents for XBC-DN10E
Page 1: ......
Page 10: ...Table of Contents Table of Contents 6 10 10 CLEAR ALL PLC 29...