Chapter 6 XG5000 Setting
6 - 9
6.3.3 High Speed Link Parameter Setting
High-speed link parameter setting is set in High-speed link screen in XG5000.
Communication module can be equipped with maximum 2 modules per a main unit in XGB.
1) Communication module and Communication period setting
If add the High-speed link in the screen of project, Communication module settings is opened. In
this screen, communication module, communication period and output data in case of emergency
can be specified.
[Figure 6.3.1] Communication module setting
Items
Description
Communication
module settings
Module type Select Pnet I/f module
Base No.
Setting of base position installed
Range of Setting: 0 ~ 7 (varying depending on the CPU module)
Slot No.
Setting of slot position installed
Range of Setting: 0 ~ 11
Communication
period settings
Period type
- Range of setting: 10ms, 20
㎳
, 50
㎳
, 100
㎳
, 200
㎳
, 500
㎳
, 1s,
5s, 10s, (default is 20
㎳
)
- This applied to Send data
- But Receive data will be processed in every scan end regardless
of communication period.
Output data
setup in
case of
emergency
settings
CPU
error
Latch
Keeps its output status
Clear
Clears all outputs
CPU
stop
Latch
Keeps its output status
Clear
Clears all outputs
[Table 6.3.1] Communication module setting
Summary of Contents for XBL-PMEC
Page 50: ...Chapter 5 PROFICON Setting 5 18 Figure 5 4 8 Network topology collected and composed...
Page 84: ...Chapter 7 Program Example 7 12 Figure 7 3 3 Screen of communication module setting...
Page 91: ...Chapter 8 Troubleshooting 8 3 8 5 Troubleshooting 8 5 1 Connection error on PROFICON XG5000...
Page 99: ...Appendix A 7 A 4 External Dimensions Unit mm XBL PMEC XBL PMEC...