1 - 2
◆
Safety Mark Description
- In the places where the cautions in usage are required, the marks such as “
DANGER”, “WARNING”,
“CAUTION”
are found.
- You should comply with the description marked on the decals attached on the product or the contents
marked with safety mark in this Operator's Manual.
Warning –
This indicates a potential dangerous situation that may cause a serious
injury or death if not avoided.
Caution –
This indicates a potential dangerous situation that may cause a light
injury or damage to the properties if not avoided.
Notice –
This indicates the instructions for right use for the safety of persons or
products.
Danger
– This indicates a fatal dangerous situation that may cause a serious injury
or death if not avoided.
Notice
Caution
Warning
Danger
Never remove or modify or change
the driver’s protection device or safety device arbitrary.
You must take the necessary precautions to always be
aware of the possible presence of
bystanders
, certainly when maneuvering in confined areas. Keep people away from the tractor during
work. Pay the necessary attention while operating next to public roads or footpaths. Thrown objects
can get projected outside the field and hit unprotected people like bikers or pedestrians. Wait until it is
clear of bystanders.
Do not violate the
local traffic rules
related to public roads and highways.
Do not allow riders
on the tractor; do not allow people standing on the access way or step to the
cab when the tractor is moving. Your view to the left will be obstructed and a rider risks to fall from the
tractor during unforeseen or abrupt movements.
This tractor has only one operator station
and is a one man operated vehicle. Other people on or
around the tractor during normal operation are not allowed.
Always stay clear from implements operating area and especially
do not stand between tractor
and trailed vehicle either three-point linkage when operating lift controls
; ensure no bystanders
are near these operating areas.
This tractor may be equipped with a number of sensors to control safety functions.
Do not attempt
to bypass any function
on the tractor. You will be exposed to serious hazards, and moreover, the
behavior of the tractor may become unpredictable.
The manufacturer will not be responsible for the damage or safety problems caused by maintenance
or repair with non-genuine parts. It must be requested to
use the genuine parts
.
When cleaning the tractor by using high pressurized water,
do not inject water directly to the
electronic parts, wiring, air intake pipe, hot engine or muffler
inside the bonnet.
Maintenance and repair of the tractor is performed by
skilled technical experts with the proper
tools
authorized by the manufacturer.
For damage or accidents caused by misuse or operation in violation of these rules, the manufacturer
and its distributors
will not have any responsibility and warranty
.
Keep this operator’s manual
for future reference at hand (on the tractor).
