![background image](http://html1.mh-extra.com/html/ls-tractor/xg3025/xg3025_operators-manual_1943872082.webp)
4 - 18
Module : DP 16/32
Number of Teeth : 15T
(1.77 in.)
(0.94 in.)
(0.84 in.)
(0.98 in.)
MID PTO
1 speed gear (15T)
PTO / Engine speed
2000 / 2545 rpm
Rotation direction
Counter clockwise (When looking at PTO shaft end)
Shaft dimension
(Unit : inch)
③
Specification and Dimension of the middle PTO shaft (optional)
④
Attaching the PTO drive shaft
z
When connecting PTO drive shaft to the PTO shaft and implement, make sure to check the fixing
status of the locking pins.
z
When attaching implements with power take-off drive shafts, refer to the drawings as below.
z
After installing implements,
- check the inclination of the PTO drive shaft,
- check the interference with PTO safety cover and other structure,
- check the effective engaging length of the PTO drive shaft according to the position of the 3-point
linkage.
z
The stiff inclination of the drive shaft makes a loud noise and may cause a failure of the driveline.