![background image](http://html1.mh-extra.com/html/ls-tractor/xg3025/xg3025_operators-manual_1943872087.webp)
4 - 23
(7) Adjusting Wheel tracks and tire replacement
②
Rear wheel
z
When altering rear wheel track, check the radial
and lateral clearance between rear tire and
tractor chassis as below.
- A : 15mm (0.6 in) (Minimum)
- B : 30mm (1.2 in) (Minimum)
z
When refitting the wheels or/and rim disk, tighten
the bolts and nuts to the following torques then
check periodically as the instructions of section 5
in this manual.
①
Rim-disk nuts (M16) : 220 ~ 270 N.m
(163 ~ 199 lbf.ft)
②
Wheel nuts (M16) : 216 ~ 245 N.m
(159 ~ 181 lbf.ft)
z
The track widths in the following pages are only
for specific wheels (7-14 4PR / 11.2-24 8PR)
and may vary by depending on tire size.
▶
The tractor wheels are very heavy, BE CAREFUL.
▶
When removing the wheels, proceed with extreme caution,
use a suitable hoist
and
specific equipment to move
the heavy parts.
Warning
▶
When adjusting the wheel track, pay attention to the direction of tire lugs.
If it
shows
“/\” shape
when looked behind, it is correct.
▶
Actual settings may vary depending on the brand of the rim and type of tire.
Notice
①
Front wheel
z
The rim and disk assembly of the front wheel is
not adjustable type.
See next page for the details.
“A”
“B”
FENDER