3 - 36
④
Down speed control knob (Roll-bar
type)
z
Turn the valve knob to the right to lower the
implement slowly and to the left to rise speed
faster. If turning right fully, the implement shall
be fixed and even if lowering down the position
control lever, the implement does not let down.
z
Tiller work : Slow in down speed
z
plough work : Fast in down speed
z
When working in hard ground, slow down the
down speed to avoid the bounding of the
implements.
▶
When running on the road, turn right the down speed control knob slightly to lock.
▶
When changing the blades of tiller or removing grass, stop the engine and turn the
down speed control knob to right slightly to lock.
Warning
(5) Remote control lever and Quick coupler (optional)
①
Cabin type
z
These levers are used to operate the hydraulic cylinder and/or motor of the implement attached to
the tractor.
z
Push
the remote control lever forward, and the hydraulic pressure can be delivered
to the left-hand
coupler
of the related lever and right-hand coupler shall be connected to the drain.
z
Each lever of the remote control valve can be operated respectively, and when operating the levers
at the same time, the one received less pressure begins to start first.
z
After connecting and preliminary operating the hydraulic equipment, check again transmission oil
level of the tractor.
Down speed control knob
Fast
Slow
Lever
②
Lever
①
Push
Pull
When pushing lever
②
When pushing lever
①
When pulling lever
①
When pulling lever
②
Cabin type