background image

 

5

IMPORTANT ELECTRICAL INFORMATION  |

II. IMPORTANT ELECTRICAL

    INFORMATION

   Route the power cord away from any moving part of the treadmill including the elevation mechanism

    and transport wheels.

   

NEVER

 remove any cover without first disconnecting AC power.

   

NEVER

 expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors, near

    a pool, or in any other high humidity environment.

   This is a high-power item; please do not share the same outlet with other high power machines such

    as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
    the fuse is 10A.

WARNING!

This treadmill requires a right power source to properly operate. For your safety, as well as the safety 
of others, please verify that the power source is correct before plugging the equipment. Any incorrect 
power source could cause significant damage to the equipment and or user.

GROUNDING METHODS:

This product must be grounded. Grounding provides the least resistance for electrical current and 
will reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is 
professionally installed and grounded in accordance with all local codes and ordinances. Ensure that 
the product is connected to an outlet which contains the same configuration as the plug. Do not use an 
adaptor for this product.

This product is for use on a nominal circuit and has a grounding plug that looks like the plug illustrated 
in sketch A. Make sure that the product is connected to an outlet having the same configuration as the 
plug. No adapter should be used with this product.

WARNING!

Summary of Contents for Dyna





























Reviews: