11
6. COMPUTER OPERATION
OVERVIEW:
The unit is an electronic that display all workout parameters on LCD display. The workout
parameters include: Scan, Time, Speed, Distance and Calories. All workout parameters may be
selected by the select key.
Mode or Function
Action
Power on
If push the button, the unit will be on and display the parameters of the last
exercise.
Select function Scan
Push the button, the unit will display 5 parameters one by one. Push the
mode key until the “SCAN” signal shows on right downside. The unit will
scan by through Time, Speed, Distance, and Calories each for 4 seconds.
Time
Push the mode key until the “TMR” points to “Time” to display the exercises
time. If the bike stop moving, the unit will stop count time also.
Speed
When the “SPD” points to “SPD” to display the speed value.
unit: km/h.
Distance
When the “DIST” points to “Dist.” to display the distance value.
unit: km.
Calories
When the “CAL” points to “CAL” to display the calories value.
unit: K Cal.
Reset
Push the mode key over 3 seconds the showing will become to zero.
Auto off
The unit will be off if the speed signal stops over 4 minutes.
SPECIFICATIONS:
FUNCTION
Auto Scan
Every 4 seconds
Elapsed Time
00:00~99:59
Speed
0.0~99.9km/h
Distance
0.00~99.99km
Calorie
0.00~999.9kcal
Controller
4-bit single chip microprocessor
Sensor
No-contac
t
magnetic type
Battery type
2 pcs of Size-AA or UM-3
Operating temperature
0°~+40
℃
St
orage
temperature
-10°~
＋
60
℃
