8
STEP 3:
STEP 4:
a) The Pedals (pt.1 L & pt.1 R) are marked
"L" and "R" - Left and Right. Connect
them to their appropriate crank arms. The
right crank arm is on the right- hand side
of the cycle as you sit on it.
Note that the Right pedal should be
threaded on clockwise and the Left pedal
anticlockwise.
a) First, the elastic bolt (7) of the large ball
head is relaxed and pulled down. Then,
the armrest regulating tube assembly (17)
is inserted into the inter-tube bushing of
the main frame assembly (16) to make it
in proper position. Then, the elastic bolt
(7) of the large ball head is released and
locked.
b) The armrest tube assembly (18) is then
fixed on the armrest regulating tube
assembly (17) with a light elastic washer
(24), a flat gasket (25) and an inner
hexagonal cylindrical screw (23), and the
armrest tube assembly (17) is locked.
Finally, the armrest cover (26) is clipped
to the armrest tube assembly (18).
ATTENTION: YOU SHOULD FIX THE
HANDLEBAR TIGHTLY
c) Fix the computer (81) onto the Handlebar
post (pt18) with 1pcs Bolt (41),connect A1
& A2.
