13
“START” button:
Press this button to start the machine. The machine will run at the lowest speed or at the
speed of default program after 3 seconds time count down.
“STOP” button:
Press this button to stop the machine, the machine will slow the speed still stop.
“SPEED+/-”:
Adjust the speed. Press the button to adjust the speed when running or adjust the data when
stop.
“SPEED
（
3,6,9,12
）
”:
Adjust the speed quickly.
“/-”:
Adjust the incline. Press the button to adjust the incline when running or adjust the data when
stop.
“INCLINE
（
3,6,9,12
）
”:
Adjust the incline quickly.
Left Handrail Button:
Incline adjustment button.
Right handrail button:
Speed adjustment button.
Notice: When any button is pressed, it will be accompanied by a prompt tone. When the button is adjusted for
parameter overrun, it will be accompanied by a long tone prompt. There is no beep when the button is
pressed Invalid.
3. MAIN FUNCTION
Open the power switch, the screen window will light up, the machine will enter standby state.
4. START-UP QUICKLY (MANUAL):
Put safety key, press ‘START’ button, the treadmill will run at the lowest speed in 3 seconds, press
SPEED+/-
to adjust the speed. Press
/-
to adjust the incline. Press the ‘STOP’ button or take out the safety
key directly to stop the treadmill.
4.2. COUNT DOWN MODE:
Press the ‘MODE’ button to choose; time countdown mode, distance count down mode, calories countdown
mode, and the screen window will show the default data and blink. Use
SPEED+/-
and
/-
to set the
data. Press ‘START’ button, the machine will run at the lowest speed, you can press
SPEED+/-
to change the
speed, press
/-
to change the incline. When it counts down to 0, the machine will stop smoothly.
You can also stop the machine by pressing ‘STOP’ button or taking out the safety key.
Summary of Contents for VULCAN M2
Page 32: ...32 10 EXPLODED DIAGRAM...
