Sphensor
–
User manual
LSI LASTEM SRL
INSTUM_04291
Pag. 13 / 32
8.
Choose
Read
to receive the default sensor configuration. This will be received as soon as the sensor
communicates with Sphensor Gateway (see PARENT POLLING RATE sensor parameter).
9.
Select the received configuration line and choose
Clone
to create your own configuration from a copy
of the factory configuration. Sphensor Manager will automatically open the sensor configuration dia-
log, logically divided by topic.
The
INFO
tab displays information about the new configuration.
In detail:
➢
CONFIG ID
: is an identifier, unmodifiable, automatically assigned. In case of use of a new
configuration, the identifier is set completely with characters "0"; in case of use of derived
configuration, the identifier is set with the corresponding value of the configuration from
which it was cloned.
➢
CONFIG DATE/TIME
: is the configuration creation date/time.
CONFIG VERSION
: is the version of the configuration.
10.
The DATA LOGGER tab contains the parameters related to the measurement acquisition.
