Sphensor
–
User manual
LSI LASTEM SRL
INSTUM_04291
Pag. 9 / 32
-
Sphensor Gateway is able to accept direct connection up to 32 sensors. If there are multiple sen-
sors, repeaters or sensors with a repetition function shall be used.
-
The Repeater can accept up to 10 sensors. If there are multiple sensors, other repeaters or sensors
with a repetition function shall be used.
2
Safety requirements
Read the following general safety rules to avoid personal injury and prevent damage to the product or any
other products related to it. To avoid possible damage, use this product only in the way it is specified.
2.1
General requirements
Only qualified service staff shall be authorized to carry out installation and maintenance procedures.
Install the tool in a clean, dry and safe place.
Humidity, dust and extreme temperatures tend to deteriorate
or damage the instrument. In such environments it’s recommended to install inside suitable containers.
Power the instrument appropriately.
Respect the supply voltages indicated for the instrument model
owned.
Make the connections appropriately.
Carefully follow the connection schemes provided with the instrumen-
tation.
Do not use the product if you suspect the presence of malfunctions.
If a malfunction is suspected, do not
power the instrument and ask for the intervention of qualified service staff.
Before any operation on electrical connections, power, sensors and communication equipment:
•
Turn off the power.
•
Discharge the accumulated electrostatic charges by touching a conductor or a grounded system.
Do not operate the product in presence of water or moisture.
Do not operate the product in an explosive atmosphere.
Lithium-ion battery inside.
Replacing the battery with an incorrect type can cause risk of explosion.
