LSI LASTEM M-Log – User’s manual
17
While showing the values of the measures:
Goes to the diagnostic window Type 1
Changes the display mode of the measure name (extended, abbreviated), of
the measure unit, the number of terminal which the sensor is phisically
connected to or ID/channel of radio sensor, alarms set and resistances of
recognition (only for series models ELO009)
Scrolls up the measure list
Scrolls down the measure list
Holds/releases measure scrolling
Switches the display off and on
While showing diagnostic information:
Shifts to the display window of the values of the measures.
If applicable, pressed at the same time with
key, it resets display data
(statistics, errors and other information).
In the display window of the communication statistics it shifts from serial 1
statistics to serial 2 and vice versa; in the type 5 diagnostic window it shows or
hides the additional information about the GPRS modem (only LSI LASTEM
technicians).
Shows the previous diagnostic window.
Shows the next diagnostic window.
In the type 5 diagnostic window it switches on the GPRS modem (in case it’s
switched off) and starts the data communication through GPRS; in the type 4
diagnostic window it powers on actuators; in the type 7 diagnostic window it
powers on the radio of Slave instruments.
In the type 5 diagnostic window it resets GPRS modem.
