Chapter 11 Installation and Wiring
11-8
2) Detachment of Module
•
Loosen the fixed screws of the upper part of module from the base.
•
Hold the module by both hands and press the fixed hook of module thoroughly.
•
By pressing the hook, pull the upper part of module from the axis of the lower part of module.
•
By lifting the module upward, remove the fixed projection of module from the fixing hole.
Notes
1) In case of detachment of module, press the hook and remove the module from the base, and
then remove the fixed project of module from the fixed hole of module. In this case, if forced
to detach the module, a hook or the fixed projection of module may be broken.
Module fixing hook
