2
Thank you for choosing our products. We strongly advise you to read this user manual
thoroughly. It contains important instructions about installation, setup and use of the
gauge. By obeying these instructions, the product will reward you with long-time
reliability.
Basic information
The FuelGaugePro – Bar Graph Display Panel is a display panel designed for displaying actual amount of
fuel in fuel tank in cooperation with FuelGaugePro - Float-free Fuel Level Sensor. It is mountable on
double-sided adhesive tape on the dashboard of motorcycles, cars, boats etc. For best visibility on the
direct sunlight and not blinding at night, the display panel have automatic brightness regulation.
After installation, the whole system needs to be calibrated (except bike specific kits where the system is
factory calibrated). Calibration data are stored in display panel.
Technical specification
Supply voltage:
12V DC - supplied by FuelGaugePro - Float-free Fuel Level Sensor
Energy consumption:
4W max. incl. consumption of FuelGaugePro - Float-free Fuel Level Sensor
Fuse:
power lines fused by FuelGaugePro - Float-free Fuel Level Sensor
Working temperature:
-30°C to +60°C
Dimensions:
31 x 21 x 17mm
Device is shockproof and waterproof.
Device doesn’t lose its memory after being disconnected from power.
Device is equipped with automatic display brightness regulation.
