LT-600 LED lighting control system instructions for use Page of 5
2
，
Forward
，
Thanks for choosing our LT-600 LED lighting control system. Before
installation and usage, we strongly recommend you to read through this
manual carefully.
，
After-Sales
，
From the day you purchase our products within a year, if being used properly in
accordance with the instruction, and quality problems occur, we provide free repair
or replacement services except the following cases:
1. Any defects caused by wrong operations..
2.
Any damages caused by inappropriate power supply or abnormal voltage.
3. Any damages caused by unauthorized removal, maintenance, modifying
circuit, incorrect connections and replacing chips.
4.
Any damages due to transportation, breaking, flooding water after the
purchase.
5.
Any damages caused by earthquake, fire, flood, lightning strike etc force
majeure of natural disasters.
6. Any damages caused by negligence, inappropriate storing at high
temperature and humidity environment or near harmful chemicals.
7.
Product has been updated.
，
Safety warnings
，
1. Please don’t install this controller in lightening, intense magnetic and
high-voltage fields.
2. To reduce the risk of component damage and fire caused by short circuit,
make sure correct connection
3. Always be sure to mount this unit in an area that will allow proper
ventilation to ensure a fitting temperature.
4.
Check if the voltage and power adapter suit the controller
5. Don’t connect cables with power on, make sure a correct connection and
no short circuit checked with instrument before power on.
6. Please don’t open controller cover and operate if problems occur.
The manual is only suitable for this model, any update is subject to change
without prior notice.
