T2
LED Color Temperature Controller
1
2
T2 is the 2.4GHz RF wireless synchronization color temperature controller which adopts LTECH multiple
global initiate technology, the control system consists of two parts, the RF remote control and the receiver,
realize the signal synchronization on unlimited receivers within effective distance, a very good solution for the
LED project needs sync control wirelessly.
1. Technical Specs:
2. Product Size:
T2
2
.
4G LED Color Temperature Controller Manual
Can RF remote the functions of color temperature dimming, quick color temperature/brightness selection, DIY
and delay off and so on. User-friendly color wheel for color temperature adjustment, unique LED state light
for sync change indicated, user can simply know the LED working state from distance by checking the remote
control.
Input Voltage: DC5V Built-in Lithium Battery
Working Current:
≤
30mA
Working Frequency: 2.4GHz
RF Remote Distance: 30m
Remote Option: sync control unlimited receivers
T2 Remote Control
Standby Time:
≤
6 Months
Battery Capacity: 1000mAh
Dimensions: L145×W55×H22(mm)
Package Size: L168×W102×H28(mm)
Weight (G.W.): 200g
T2
T3-CV
T3-CC
T2
2
.
4G LED Color Temperature Controller Manual
Input voltage: DC12V-DC48V
Output voltage: DC3V-DC46V
Output current: CC 350/700/1050mA ×2CH (CT control)
Output power: 1.05W~48.3W ×2CH Max 96.6W
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30
℃
~55
℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 150g
T3-CC Receiving controller (current 3 in 1)
Input voltage: DC5V-DC24V
Max current load: 6A×2CH Max 12A (CT control)
Max output power: 60W/144W/288W(5V/12V/24V)
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30
℃
~55
℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 140g
T3-CV Receiving controller
T2 RF remote control
T3-CV/T3-CC
Remote holder
Learning ID:
If you want to control multiple receivers synchronously, just follow the above instructions for each receiver.
Cancelling ID:
3. The learning ID method of remote control:
4. Components Description for Receiver and Remote Control:
1. Turn on the receiver and remote control
Short press "ID learning button"
on the receiver, the running light keeps on, then long press any keys
(except on/off key) on the remote, the running light returns to flash (the buzzer long beep, the indicator light
flashes 3 times), activated successful.
2.
1. Turn on the receiver and remote control.
2. Press “ID learning button”
on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote
.
DC12V
~
48V
T3-CC
Current
selection
switch
(
Method
of
operation
see
below
form
)
Remote
ID
Learning Button
Power
Input
Socket
LED
Lamp
Connected
Socket
DC5V
~
24V
T3-CV
Remote
ID
Learning Button
Power
Input
Socket
LED
Lamp
Connected
Socket
