T4
LED RGBW Controller
T4
is
the 2.4GHz RF wireless sync/zone RGBW controller which adopts
4 global initiate technology. It has powerful function that general RF
remote control can’t realize, especially in wireless connection between
receivers to realize sync dynamic change effect. It is very convenient
in installation for users.
— 2 —
— 1 —
Charging Voltage:
Working Current:
Working Frequency:
Remote Option:
Battery Capacity:
Package Size:
Weight (G.W.):
5Vdc(Built-in lithium battery)
<30mA
2.4GHz
Sync/Zone/Programming Control
1000mAh
L168×W96×H34(mm)
210g
T4 Remote
2. Technical Specs:
T4-CV Receiver
T4-CC Receiver
Input Voltage:
Current Load:
Output Power:
Working Temp.:
Package Size:
Weight (G.W.):
Wireless Signal:
5
～
24Vdc
5A×4CH Max 20A
-30
℃
～
55
℃
L178×W48×H33(mm)
150g
2.4GHz
Input Voltage:
Output Voltage:
Current Load:
Output Power:
Wireless Signal:
Working Temp.:
Package Size:
Weight (G.W.):
12
～
48Vdc
3
～
46Vdc
CC 350/700/1050mA×4CH
1.05W
～
48.3W×4CH
-30
℃
～
55
℃
L178×W48×H33(mm)
165g
Max 193.2W
2.4GHz
1. Product Size:
3. Notice for the Remote Charging:
C. No memory effect in the lithium battery of remote. Follow the standard charging procedure even for the first 3 times, no need over charge.
B. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote can be chargeable even at off
state, which the indicator light is dark.
A.
When charging, please connect USB cable to the mobile charger.
D.
Red indicator light flickers meaning low battery and need to be charged. Charging in low battery will affect the life of battery.
E.
The remote should be full charged and stored at a ventilated and
dry place when long time no use, and please full recharge every 3 months.
LED RGBW Controller
LED RGBW Controller
Remote
Remote Holder
Receiver
Max 100W/240W/480W(5V/12V/24V)
