9. Other Special Functions:
Turn on the remote, long press the “on/off” key for 5 seconds until the red light flashes 3 times, and then the green light flashes, the
numbers of the green flash will be the frequency point of the remote. you can only edit the frequency point after 3 seconds.
In frequency changing state,
A. Reset Function:
B. Check and Edit the Frequency Point on the Remote:
Long
press the 2 keys
simultaneously
,
release
after 3 seconds,
the
remote
will
auto
off
,
undo for more than 1 minute, means
reset
completed
.
and then could restart the remote.
Feature:
Reset function is available when remote operates abnormally.
Operation:
a.
b. Multiple remotes sync-control becomes available when they use the same frequency point.
Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user.
Attn:
After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.
Feature:
Check the Frequency Point on the Remote:
Edit the Frequency Point on the Remote:
Method 2: Long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the frequency point accumulate 1.
In short, long press the “on/off” key over 5 seconds each time, the frequency point will accumulate 1, which will again become value 1
when added to 12, and that cycle repeats.
Method 1: Short press any key from “1-8”, the frequency point will be “1-8” correspondingly, the green light will flash in the same numbers. Then
press any key or touch the color circle to exit the frequency edit state.
10. Attention:
11. Warranty Agreement:
A. The product shall be installed and serviced by the qualified person.
G. If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
F. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
E. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is
secured tightly in the connector.
D. Please check if the output voltage of the LED power supply used comply with the working voltage of the product.
C. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
B. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure.
A. We provide lifelong technical assistance with this product:
★
This manual only applies to this model. We reserve the right to make changes without prior notice.
D. Any amendment or adjustment to this warranty must be approved in writing by our company only.
C. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. We shall not be liable for any incidental or
consequential damages for breach of any stipulation in this warranty.
B. Warranty exclusions below:
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if cover manufacturing faults only.
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
The product has been replaced by a brand new product.
Warranty label, fragile label and unique barcode label have been damaged.
— 10 —
— 9 —
Update Time:2016.01.21
LED RGBW Controller
LED RGBW Controller
